These ToolRig™ STRIKER Craftsman Trousers suit active work where you need durability, freedom to move and a flexible way to carry tools. The CORDURA® 4-way stretch fabric moves with you as you climb, crouch and kneel. The COOLMAX® inner face draws moisture away from the skin and dries quickly, so you stay drier when the work gets physical.
The ToolRig™ rail around the waist lets you set up pockets and accessories to suit each job. Tool pockets and a hammer holder come with the trousers. When the load gets heavier, ToolRig™ braces or a harness can be clipped on to share the weight.
Key features
- ToolRig™ rail runs 360° around the waist, so you can move and swap pockets and accessories to where you need them
- Removable, interchangeable hanging tool pockets with CORDURA® reinforcement, plus a hammer holder strap, are included
- Loops for ToolRig™ braces or harness help spread heavy loads for better ergonomics
- Zip ventilation along the outside of the legs lets you release heat when you are working hard
- Pre-shaped knees and a raised back waist support kneeling and bending throughout the day
- Kneepad pockets in CORDURA® Stretch Dobby, with stretch material inside and out, hold their shape and flex as you move
- Reinforced ruler pocket with extra pocket and pen pocket, zipped leg pocket, back pocket with bellow, inset pockets and a removable ID pocket
- Black reflective strips on the back of the legs add visibility in low light
Materials and performance
Double-face 4-way stretch fabric of 53% polyamide, 40% polyester and 7% elastane, 236 g/m². The outer face is CORDURA® for durability, with COOLMAX® on the inside for moisture transport and quick drying. Plastic zip fly and metal press studs.
Standards and protection
Certified to EN 14404-3 when worn with Blåkläder knee protection 4027, 4032, 4057 or 4058 in the kneepad pockets.
Fit and sizing
Slim fit. All Blåkläder trousers fit on the small side. Please order at least one waist size bigger than usual. See our Blåkläder Sizing Guide for detailed information.
Working with the ToolRig™ system
These trousers form part of the Blåkläder ToolRig™ system. Start with the included tool pockets and hammer holder, then reposition or swap them along the waist rail as your tasks change. For heavier tool loads, attach ToolRig™ braces or a harness to the dedicated loops to take weight off your hips.
Care
- Machine wash at 40°C
- Do not bleach
- Tumble dry at low temperature
- Iron at a low temperature (max 110°C)
- Do not dry clean
Add your logo
If you’d like to add your logo to the Blåkläder 1979 ToolRig™ STRIKER Craftsman Trousers 4-Way Stretch, please contact us.


























